!["2024 Approved Download, Installation, and Operation Simplified Guide to EZ Grabber"](https://www.lifewire.com/thmb/6mx5ubcqWIE245JjiBlgZpvI48I=/400x300/filters:no_upscale():max_bytes(150000):strip_icc():format(webp)/Horserace-56ca33a85f9b5879cc4bcc6e.jpg)
"2024 Approved Download, Installation, and Operation Simplified Guide to EZ Grabber"
![](/images/site-logo.png)
Download, Installation, and Operation Simplified Guide to EZ Grabber
Are you a full-time gamer or like to rewatch some spectacular scenes from the movies or videos you see on your computer later? But are unable to record those moments separately and at that instant and later need to go back to that point of the scene to record the same. It might get a bit time-consuming and frustrating to do so. For this situation, the ideal problem solver would be installing the EZ grabber software on your computer.
The EZ grabber software is a piece of capturing equipment designed to capture MPEG that converts the images on screen into videos. You can easily record the videos on screen by clicking the rec button and connecting your device using an S-video connector or an AV. The resolution of the videos can touch the heights of 720p, which you can also edit and upload on the internet.
Part 1. How to download and install EZ Grabber?
After knowing about the EZ grabber windows 10 software, you might wonder how to download the software correctly on your computer. And install the same through following specific steps for it. That is why here in this article, we will direct you through the steps which, if you follow unconditionally, will let you enjoy the software: -
Step 1
When you have successfully downloaded EZ grabber software on your computer, the operating system will send you a new message that a new hardware device has been found on your device. Please click on the option cancel once you see that.
Step 2
Once you insert the CD, the operating system automatically asks you to click on the driver install option and run the setup.
Step 3
Click on the next button and then install. After installation, a finish option will appear, indicating the devices have been successfully installed.
Step 4
Ensure that DirectX9.0 has been installed before, or else the system will automatically prompt you to install the same.
Step 5
Then, click on the next button in front of you and continue installing the components until it’s done.
Step 6
Once the components are installed, prepare for the EZ grabber to get started and click on the next button.
Step 7
A box containing windows media format9 will appear when you click the yes option. Clicking on the yes will continue the installation of the Windows media format9.
Step 8
For the last step, the system will ask you to restart the device and click on the finish option. An icon representing the EZ grabber will appear on your device, indicating the application has been installed successfully.
Part 2. How to Use EZ Grabber?
Once you have downloaded and installed the EZ grabber 2 software application on your device, the next bit of information you might lack would be how to use the application properly. If you are new to any application, you might need some guidance that would help you open it and use the same conveniently without any problem. Let us look at various steps of using the EZ grabber software: -
Step 1 Recording
The application of EZ grabber mac‘s primary purpose would be using it for recording the content displayed on your screen. It saves the content in the form of MPEG to save space. Press the record button to start the recording and press the same to stop it. It would save the file by default.
Also, there are a few set-up options you may opt for:
Step 2 Screenshot
When you are watching something on the screen, press the snapshot button to capture the picture and save it in the form of .bmp format. The image will be saved automatically.
Step 3 Video Playing
Click on the screen recorder and choose to record your favorite scene of yours. Double-clicking on the same will display you where the video is saved.
Part 3. EZ Grabber Alternative to Record PC Screen
Suppose you still have problems using EZ grabber 2 or might not be satisfied by its functionality or quality. Then, there are many other options out there that could provide you with the same features in a more enhanced way. However, if you find choosing from all the different options challenging, then Filmora could be the perfect screencasting software.
Through Filmora, you can easily record all the activities on your desktop and share them with others. But you might not know how to use this software to record PC screen . That is why we have made a listicle of the steps by which you can easily use Filmora to record.
First of all, there are three ways through which you can record the computer screen by Filmora.
- **Method 1:**First, you can select the record on the PC screen button in the start-up window.
- Method 2: You can choose the following method: entering the player panel and clicking on the file option. Choose the record option available there and select from any Webcam, Record from the PC screen, and voiceover record.
- Method 3: The last way or method you can choose would be recording by combining all three methods from webcam, through the screen, and also voiceover.
Let us now look at the various steps through which you can record in Filmora: -
Free Download For Win 7 or later(64-bit)
Free Download For macOS 10.14 or later
Step 1
For the first step, you will see a rectangle icon on the left side of the Filmora screen recorder window. By clicking on it, you can start recording. There would be three options: Full screen, custom, and Target window; choose any one.
After that, click upon the microphone option and select the mic through which you start narrating your voice. Additionally, you will be able to disable the speaker option of the computer while in the recording session.
Step 2
- After the first step, you will see the settings option on the right lower corner of the screen recorder window. Click upon that option to know more.
- You can choose where you want the recording to be saved on your computer’s hard drive. You can also adjust the quality and frame rate per your preference through the Quality menu at the drop-down window.
Step 3
For the 3rd step, mark on the mouse checkbox that would offer you the option if you want to keep the mouse cursor on your video or not. Moreover, you can also expand the time or set the timing of the screen recording duration and put it into the record timer box.
Step 4
After completing all these steps, click on the recording button and initiate the new screen recording session. Once you do this, the recording will start after a three-second delay.
If you want to stop the recording in between or end the screencasting, press the F9 button. The file would be automatically saved on the Filmora folder, and you can edit the same after completing it.
Conclusion
Where you were facing problems recording videos on your screen and could not choose the right software to do it? Then hopefully, after reading the article, you can now choose to use EZ grabber software by downloading it from the internet, following the steps mentioned above. However, if you see that EZ grabber is not the one for you, we have also recommended Filmora. It might be the perfect one as it offers way more options to screen record and edit the same through your preferences.
Free Download For macOS 10.14 or later
Step 1
For the first step, you will see a rectangle icon on the left side of the Filmora screen recorder window. By clicking on it, you can start recording. There would be three options: Full screen, custom, and Target window; choose any one.
After that, click upon the microphone option and select the mic through which you start narrating your voice. Additionally, you will be able to disable the speaker option of the computer while in the recording session.
Step 2
- After the first step, you will see the settings option on the right lower corner of the screen recorder window. Click upon that option to know more.
- You can choose where you want the recording to be saved on your computer’s hard drive. You can also adjust the quality and frame rate per your preference through the Quality menu at the drop-down window.
Step 3
For the 3rd step, mark on the mouse checkbox that would offer you the option if you want to keep the mouse cursor on your video or not. Moreover, you can also expand the time or set the timing of the screen recording duration and put it into the record timer box.
Step 4
After completing all these steps, click on the recording button and initiate the new screen recording session. Once you do this, the recording will start after a three-second delay.
If you want to stop the recording in between or end the screencasting, press the F9 button. The file would be automatically saved on the Filmora folder, and you can edit the same after completing it.
Conclusion
Where you were facing problems recording videos on your screen and could not choose the right software to do it? Then hopefully, after reading the article, you can now choose to use EZ grabber software by downloading it from the internet, following the steps mentioned above. However, if you see that EZ grabber is not the one for you, we have also recommended Filmora. It might be the perfect one as it offers way more options to screen record and edit the same through your preferences.
Free Download For macOS 10.14 or later
Step 1
For the first step, you will see a rectangle icon on the left side of the Filmora screen recorder window. By clicking on it, you can start recording. There would be three options: Full screen, custom, and Target window; choose any one.
After that, click upon the microphone option and select the mic through which you start narrating your voice. Additionally, you will be able to disable the speaker option of the computer while in the recording session.
Step 2
- After the first step, you will see the settings option on the right lower corner of the screen recorder window. Click upon that option to know more.
- You can choose where you want the recording to be saved on your computer’s hard drive. You can also adjust the quality and frame rate per your preference through the Quality menu at the drop-down window.
Step 3
For the 3rd step, mark on the mouse checkbox that would offer you the option if you want to keep the mouse cursor on your video or not. Moreover, you can also expand the time or set the timing of the screen recording duration and put it into the record timer box.
Step 4
After completing all these steps, click on the recording button and initiate the new screen recording session. Once you do this, the recording will start after a three-second delay.
If you want to stop the recording in between or end the screencasting, press the F9 button. The file would be automatically saved on the Filmora folder, and you can edit the same after completing it.
Conclusion
Where you were facing problems recording videos on your screen and could not choose the right software to do it? Then hopefully, after reading the article, you can now choose to use EZ grabber software by downloading it from the internet, following the steps mentioned above. However, if you see that EZ grabber is not the one for you, we have also recommended Filmora. It might be the perfect one as it offers way more options to screen record and edit the same through your preferences.
Free Download For macOS 10.14 or later
Step 1
For the first step, you will see a rectangle icon on the left side of the Filmora screen recorder window. By clicking on it, you can start recording. There would be three options: Full screen, custom, and Target window; choose any one.
After that, click upon the microphone option and select the mic through which you start narrating your voice. Additionally, you will be able to disable the speaker option of the computer while in the recording session.
Step 2
- After the first step, you will see the settings option on the right lower corner of the screen recorder window. Click upon that option to know more.
- You can choose where you want the recording to be saved on your computer’s hard drive. You can also adjust the quality and frame rate per your preference through the Quality menu at the drop-down window.
Step 3
For the 3rd step, mark on the mouse checkbox that would offer you the option if you want to keep the mouse cursor on your video or not. Moreover, you can also expand the time or set the timing of the screen recording duration and put it into the record timer box.
Step 4
After completing all these steps, click on the recording button and initiate the new screen recording session. Once you do this, the recording will start after a three-second delay.
If you want to stop the recording in between or end the screencasting, press the F9 button. The file would be automatically saved on the Filmora folder, and you can edit the same after completing it.
Conclusion
Where you were facing problems recording videos on your screen and could not choose the right software to do it? Then hopefully, after reading the article, you can now choose to use EZ grabber software by downloading it from the internet, following the steps mentioned above. However, if you see that EZ grabber is not the one for you, we have also recommended Filmora. It might be the perfect one as it offers way more options to screen record and edit the same through your preferences.
Also read:
- "Best 6 Mac Video Snaggers Compiled Here"
- "Voice Log Export & Critique"
- "The Essential iPhone Screen Recording Manual"
- "\"[New] Xbox Expansion Top 5 External Hard Drives Ranked\""
- "[Updated] Expert Tips on Documenting LOL Tournaments for 2024"
- "[Updated] In 2024, Premier Portable GBA Players on Android"
- "\"2024 Approved The Economical Path to Skype Calls as MP3 Files\""
- "\"[New] In 2024, Worlds Beyond Borders Best 10 MMO Adventures for Free\""
- "[New] Best Practices for Efficient Slide Capture for 2024"
- "\"[Updated] Best in Class Tunefab Screen Recording for 2024\""
- "[Updated] Record Video Directly From Webcam Using VLC Media Player for 2024"
- "\"[New] OutWithTheOld CamerasBeyondMyCam for 2024\""
- "\"[New] 2024 Approved Mastery in Monitoring Adding Time-Based Events to OBS\""
- "\"Desktop Capture The Windows User Guide\""
- "\"In 2024, Dividing Footage Top SplitCam's Worth in Review?\""
- "\"[Updated] In 2024, Unveiling the Latest in Non-FBX Gameplay Tracking\""
- "[New] Ultimate Biking Experience Index for 2024"
- "[Updated] Innovative House Blueprints for Snapshot Players for 2024"
- "\"Triumph Through Battle The Supreme Selection of Top 7 Total Wars for 2024\""
- "[New] In 2024, Insightful Guide to Using ShowMore for Professional Screen Recording"
- "\"[New] In 2024, X-Studio Audio PC App\""
- "\"[New] 2024 Approved Twilight Tactics Capturing the Best in Low Light Portraits\""
- "\"In 2024, Perfect Recording Companion 10 Best on Spotify Platforms\""
- "\"[Updated] Elite Escapade Experiences The Finest Action-Adventure Gems for 2024\""
- "Broadcast Your Games with Professional Skill"
- "[New] Ideal OBS Parameters for Economical PCs"
- "[Updated] Essential Tips for Recording FB Messenger Calls"
- "[New] In 2024, Continuous Media Gatherers"
- "\"2024 Approved Best Ubuntu Screen Recorders\""
- "\"Virtual Ventures 10 Near-Misses to GTA V\""
- "\"[Updated] In 2024, Unmatched Video Capture Selecting the Best PC & Mac Recorder\""
- "\"[New] 2024 Approved Essential Game Editor Tools for Novices\""
- "[New] The Ultimate Guide for Board Usage During Your Zoom Meetings (Desktop/iOS/Android)"
- "[Updated] Streamline Your Workflow with HP Screen Recordings for 2024"
- "\"From Syncing to Capturing A Complete iTunes Journey for 2024\""
- "\"[Updated] 2024 Approved The Art of Visual Anonymity in Videos\""
- "[New] In 2024, Boosting Stream Consistency with OBS Fixes"
- "[New] In 2024, Premier Live Video Harvester Pros"
- "\"[New] 2024 Approved Hack Your Webcam Efficient Recording Techniques\""
- In 2024, 3 Methods to Mirror Vivo Y78+ (T1) Edition to Roku | Dr.fone
- In 2024, How to Use Google Assistant on Your Lock Screen Of Samsung Galaxy S24+ Phone
- New 2024 Approved Trim Videos Online for Free 10 Best Websites and Tools
- Updated 2024 Approved Get Animated Discover the 7 Best Drawing Software
- How to get the dragon scale and evolution-enabled pokemon On Vivo T2x 5G? | Dr.fone
- The Complete Facebook Video Aspect Ratio Cheat Sheet for 2024
- Updated Achieving Crystal-Cleared Voices Tools for Subtracting Unwanted Acoustics in Digital Recordings for 2024
- New In 2024, Silent the Screen How to Strip Audio From Your Movies in iMovie
- How to Unlock iPhone 7 With an Apple Watch & What to Do if It Doesnt Work | Dr.fone
- In 2024, Is GSM Flasher ADB Legit? Full Review To Bypass Your Xiaomi Redmi Note 12T ProFRP Lock
- In 2024, How To Use Special Features - Virtual Location On Oppo Find N3 Flip? | Dr.fone
- New 2024 Approved Mastering Sound Editing Shorten Audio Sections in iMovie for Mac and iPhone
- In 2024, How to Transfer Data After Switching From Poco X5 Pro to Latest Samsung | Dr.fone
- New How to Add Subtitles in QuickTime Player?
- How to Unlock Realme 10T 5G Phone without PIN
- New Unbiased Review How to Obtain Filmora Without Resorting to Piracy
- In 2024, How to Record Computer Audio and Voice Audio with Audacity for Free?
- All About Factory Reset, What Is It and What It Does to Your Honor X50 GT? | Dr.fone
- In 2024, Overview of the Best Gionee F3 Pro Screen Mirroring App | Dr.fone
- Updated 10 Leading Video Resizing and Cropping Solutions
- 2024 Approved This Article Talks in Detail About How to Convert Time-Lapse to Normal Video Using Certain Methods on iPhone, Online Tools, and so On. It Further Discusses Converting Time-Lapse Video to Normal on the Computer. Check Out
- How To Unlock iPhone 11 Without Passcode? 4 Easy Methods
- In 2024, How to Unlock Xiaomi 14 Pattern Lock if Forgotten? 6 Ways
- Latest Guide on iPad 2/3 and Apple iPhone 12 Pro iCloud Activation Lock Bypass
- A Quick Guide to Poco F5 5G FRP Bypass Instantly
- New The Elite Selection Best-Selling Mac Audio Editing Tools, Ranked
- New Synthetic Symphony Building a Soundtrack to Enhance Your Cinematic Vision for 2024
- In 2024, How to use Pokemon Go Joystick on Tecno Phantom V Fold? | Dr.fone
- Tecno Spark 20C Bootloop Problem, How to Fix it Without Data Loss | Dr.fone
- Updated In 2024, Tips for GIF to Animated PNG You Should Know
- All Things You Need to Know about Wipe Data/Factory Reset For Tecno Pop 8 | Dr.fone
- Updated In 2024, Reducing Noise in Videos Made Easy with Premiere Pro All Workable Met
- In 2024, 4 Most-Known Ways to Find Someone on Tinder For Realme 12 Pro 5G by Name | Dr.fone
- Still Using Pattern Locks with Xiaomi Redmi K70E? Tips, Tricks and Helpful Advice
- Title: "2024 Approved Download, Installation, and Operation Simplified Guide to EZ Grabber"
- Author: Vivienne Westwood
- Created at : 2024-05-18 09:03:13
- Updated at : 2024-05-19 09:03:13
- Link: https://video-capture.techidaily.com/2024-approved-download-installation-and-operation-simplified-guide-to-ez-grabber/
- License: This work is licensed under CC BY-NC-SA 4.0.